Cactus V5 Bedienungsanleitung PDF herunterladen (Seite 18)

34 35

2. The continuous light output in

HSS sympathy mode does not freeze



would do. Instead, an HSS



blur, much like a continuous light

source would. In order to freeze

motion using the HSS sympathy

mode, you need to use high

shutter speeds.

3. Increasing the shutter speed in

HSS sympathy mode implies that



decreases accordingly.

Whenever changing the shutter

speed, you also need to adjust



to maintain the same contribution



Using the RF60 in HSS Sympathy Mode

To use RF60 in HSS sympathy mode, you



capability.





2. Switch the RF60 Master to HSS

sympathy mode by pressing the

MULTI/HSS button twice. The

centre row of the LCD display will

show HSS . This will

automatically turn on the optical

slave trigger in S1 (the mode in





11.3). Meanwhile, all RF60 Slave

unit(s) in activated group(s) will

turn into HSS sympathy mode

automatically.

3. Position the RF60 Master with its

optical sensor facing the TTL



4. Take a test shot by pressing the



5. If the frame is not evenly

illuminated from top to bottom,

set the delay timer (see Section

11.4) of the RF60 Master to 10ms

and then 15ms, 20ms, etc, until



The optimum delay time that works

with a high shutter speed should

be within the range of 10ms to

100ms.

Setting the Delay Time for HSS

Sympathy Mode

Consider the following when setting

the delay time for the HSS sympathy

mode:

  if the



mode, the delay time should be

within the range of 0-10ms. If the



would have to set a delay time at

55-100ms, depending on the camera

brand and shooting aperture

(F-nu mber).

 Camera brand: The following delay

time ranges are suggested for

different camera systems:

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare